Uniblitz VED24 Shutter Driver and Controller - Front
Uniblitz VED24 Shutter Driver and Controller - Rear

VED24 Shutter Driver

$1,375.00

Current Lead Time: 3 – 4 weeks

SKU: VED24 Category: Tags: , , ,

Description

Jump to: What’s Included | Shutter Compatibility | Specifications | Downloads

The Uniblitz VED24, or Versatile Electronic Driver, provides simple, straightforward shutter control. The device is single-channel, and is compatible with both uni-stable and bi-stable shutter devices. Operation options include manual shutter control, external triggering, and remote computer interfacing. Exposure is determined by external pulse (Active-Low, TTL), computer interface, or switch contact.

See the VED24 User Manual for additional information regarding this device. The VED24 is RoHS compliant and CE certified.

What’s Included

  • VED24 Shutter Driver
  • Manual (included on flash drive)
  • PS24 +24 VDC, 40W, Power Supply w/ US line cord
  • 510F Shutter Interconnect Cable (3.0 m)
  • USB-AB Cable (1.0 m)
  • 5M203D Adapter
  • 701A-S5 Adapter

Shutter Compatibility

CS DSS ES LS NS TS VS XRS
CS251 DSS10B ES6B LS21 NS15B TS2B VS141 XRS61
CS351 DSS20B LS31 NS25B TS6B VS251 XRS141
CS451 DSS25B LS61 NS25S1 VS351 XRS251
CS651 DSS35B NS35B
CS901 NS45B
NS65B

 

1 Shutter will require “E” option (“For use with VED24 or D880C”) for VED24 compatibility.

 

Don’t see your device listed above? Please contact us for information regarding the compatibility of other shutter devices.

Specifications

System Characteristics
Repeat Exposure Minimum time between exposures is determined by shutter used and open close pulse duration.
Shutter Drive Continuously variable frequency of exposures from DC to the shutter’s maximum rate
Maximum peak pulse power: 41 W
Pulse voltage Max.: +18 VDC Max
Pulse current Max.:  2.25A  (Test conditions: 18 Volts, 8 Ω – not continuous)
Power Requirements +24VDC, PS24 Included, AC power supply.
Required AC Input:  100-240 VAC, 50/60 Hz
Power Supply Output: +24 VDC, 1.67A, 40W
Input Plug (to VED24 Controller): 2 mm DC plug, Center is positive
Pulse Input (BNC) Active-low
Input impedance: 1K Ohms
Maximum source current: 100 µA
Maximum sink current: 1 µA
Minimum pulse width determined by applicable shutter
Maximum pulse width unlimited
TTL compatible:

  • Minimum high-level: +2.0 VDC
  • Maximum low-level: +0.8 VDC
SYNC Output (BNC) Active-high
Maximum source current: 3.0 mA
Maximum sink current: 20 mA
Maximum low-level: +0.5 VDC
Minimum high-level: +4.5 VDC. This output becomes active when shutter used is equipped with an electronic synchronization sensor.
 General Size (HWD) 1.61 x 5.47 x 4.6 inches (41.0 x 139.0 x 116.8 mm)
Weight 12.27 oz. (.35kg)
Included Power Supply (PS24) Input 100/240 VAC, 50-60 Hz
Output +24VDC, 1.67A, 40W
RoHS Compliant
CE Certified (optional)

 

Front Panel Layout

 

 

Front Panel
Power LED Indicator (1) LED for power, driver, and sync status
N.O./N.C. Toggle Switch (2) Toggle switch for Normally Open/Normally Closed operation
Pulse Input BNC (3) Pulse input BNC is an Active-Low TTL input signal
Function Switches (4) Local/Remote, Voltage Select, Bi-Stable/Uni-Stable, and Time Select Function switches
Pulse Duration Rotary Octal Switch (5) Selectable timing widths for specific shutters via pulse duration rotary octal switch

 

Rear Panel Layout

 

 

Rear Panel
USB Serial Control Port (1) USB Type-B receptacle for computer interface control
Sync Output BNC (2) Sync Output BNC is an Active-High TTL output signal
Shutter Interconnect (3) Shutter Interconnect for 5-pin male Switchcraft connector
DC Power Connector (4) 2.0mm DC jack – Accepts +24VDC, fuse Power ON/OFF slide switch
Power ON/OFF slide switch (5) Lower (“0”) position is “OFF”, upper (“1”) position is “ON”

Downloads

Documentation
VED24 Datasheet Download
VED24 Manual Download
VED24 Declaration of Conformity Download

Additional information

CE Certification

Yes, No

Related products