/ / / ED12DSS Shutter Driver

ED12DSS Shutter Driver

$330.00


Current Lead Time: 4 – 5 weeks


Expedites are subject to availability and will be approved upon order confirmation.

Learn more about our warranties.

Description


Jump to: What’s Included | Shutter Compatibility | Specifications | Downloads

The Uniblitz ED12DSS is an open-frame, bi-stable, single board shutter driver well-suited for integration into OEM applications. All that is required is a user-supplied +12 to +24 VDC power supply and TTL input signal source.

The ED12DSS is the optimal open-frame driver for the Uniblitz DSS series shutters. Installation requires a connection to a user-supplied power supply and input and output harness connectors, and the selection of the open and close pulse duration using the on-board 4-position piano switch. The TTL pulse duration determines the shutter’s exposure time.

See the ED12DSS User Manual for additional information regarding this device. The ED12DSS is RoHS compliant.

Current Lead Time: 4 – 5 weeks

What’s Included


  • ED12DSS Shutter Driver
  • Manual (included on flash drive)
  • 203D Shutter Interconnect Cable
  • ED-IOP Input Cable

A power supply is not included with this device.

Shutter Compatibility


CS DSS ES LS NS TS VS XRS
DSS10B ES6B NS15B1 TS2B
DSS20B NS25B1 TS6B
DSS25B NS35B1
DSS35B NS45B1

 

1 Will require “ED” option (“For use with ED12DSS…”) for ED12DSS compatibility.

 

Don’t see your device listed above? Please contact us for information regarding the compatibility of other shutter devices.

Specifications


System Characteristics
Repeat Exposure Minimum time between exposures is determined by shutter used and open close pulse duration.
Shutter Drive Continuously variable frequency of exposures from DC to the shutter in operation maximum rate.
Trigger Input Active-high
TTL Compatible
General Size (HWD) 0.50 x 2.25 x 2.25 inches (12.7 x 57.2 x 57.2 mm)
Weight 0.73 oz (0.021 Kg)
Power input: +12VDC to +24VDC at 1.5A (user supplied)
RoHS Compliant

 

Board Mechanical Layout



[columns] [span6]

P1 Connections
Pin 1 Input +12VDC to +24VDC Reg
Pin 2 Passive Power GND
Pin 3 Passive Signal GND
Pin 4 Input Trigger Input (Active High)
Pin 5 Output +5VDC / 0.25A Max

[/span6][span6]

P2 Connections
Pin 1 Output Shutter (A) Driver Output
Pin 2 Output Shutter (B) Drive Output

[/span6][/columns]

Downloads


Documentation
ED12DSS Datasheet Download
ED12DSS Manual (v 2.10) Download