Uniblitz
Electro-Programmable Shutter Systems
1.800.828.6972
Copyright® by Vincent Associates. 803 Linden Avenue Rochester, NY 14625 PH: 1.800.828.6972 | Privacy Policy | Site Map
ED12DSS

ED12DSS

Download PDF Specifications Document

Choose your region to reveal pricing.

U.S. and Canada
Other

Select your region above in order to see
the appropriate pricing for our products.



Quantity Discounts

25-49 - 10% Discount off list
50 and above - 15% Discount off list





Disclaimer - photos are for illustrative purposes only.


ED12DSS User Manual ver 1.00

The ED12DSS is the optimal driver for the new UNIBLITZ® N-CAS® DSS Shutter Series. This device will operate a single DSS shutter or a single NS series bi-stable shutter from a +12 to 24VDC power supply. (Bi-stable mode only requires power when switching the shutter’s state.) Once the input and output connector harnesses are connected, the user selects the open and close pulse duration - via the on-board 4-position piano switch - and connects a user supplied power supply. Once the shutter and the TTL input signal are connected together, the shutter’s exposure can be controlled via a TTL square pulse input. (Pulse duration determined exposure time.)

The ED12DSS can be easily integrated into OEM applications where a +12 to 24VDC power supply is available.

FEATURES

  • Open frame printed circuit card suitable for OEM applications, see Figure #1 RoHS Compliant
  • Operates DSS series or NS series bi-stable shutter devices.
  • 2-Pin JST shutter interface connector
  • 203D Shutter interconnect cable included – JST 2-pin to JST 2-pin 3ft in length
  • Exposure determined by external pulse (BNC,TTL active high) or switch contact closure (when switching internal +5VDC into shutter input)
  • In-line PULSE INPUT BNC active high 5V TTL
  • Selectable pulse high current duration for specific DSS/NS series shutters via 4-position piano switch
  • Internal fuse protection for SHUTTER OUTPUT
  • Operates on +12 to 24VDC at 1.5A
  • Power input to controller via 2-wire input harness
  • ED-IOP Input cable harness included for power input, 5V TTL signal input (BNC) and +5VDC output (to enable driver from external switch or transistor contact). Input / output interface cable, red / black bare leads for power – 18 inches, BNC trigger input – 6 inches both terminate to Tyco / Amp 5-pin polarized connector for connection to ED12DSS.
  • +12 to 24VDC External power supply (user supplied) for operation, PS12 not included
  • Size (HWD) 0.50 x 2.25 x 2.25 inches (12.7 x 57.2 x 57.2 mm)
  • Weight 0.730 oz (0.021 kg)